1. You can adjust the pedal stop on the throttle pedal by loosening the locking thumbnut.

2. Remove the rod clevis and lift up the rod.

3. Push the pedal slightly forward and rotate the thumbscrew (Clockwise to move the pedal forwards, Counter-Clockwise to move the pedal backwards).

4. Once you have achieved your desired position, tighten the locking thumbnut and re-insert the rod clevis.

5. Recalibrate your pedals in the RaceHub™ (see section 6.3 Pedal Calibration).

Always remember that the spring must not act as a stop, instead adjust the throttle pedal stop (see 4.2.7 throttle travel distance adjustment).